|
Calibration Documentation
All Calibration Documentation issued by Odin Metrology, Inc. contains
all information as required in ANSI/NCSL Z540, ISO Guide 25 and ISO 17025.
Odin Metrology, Inc. provides detailed worksheets with all data
both for "AS RECEIVED" condition and for "AS FINAL".
For Bruel & Kjaer filters incorporated into Analyzers like the 2131,
3360, 2123, 2133, 2140, 2144 and for Sound Level Meters 2236 and
2238 a complete Filter Analysis Report is included at NO CHARGE
as part of the regular calibration documentation. For instance for
the 2133 and 2144 each 1/3 and 1/1 octave filter from 20 Hz to 20
kHz is measured at 64 different test frequencies and compared to
the tolerances as specifies in ISO 1260, 1995 resulting in an 85
page Filter Analysis Report.
Click
here for a Sample of a 2133 1 kHz 1/3 octave Filter Report.
Microphone Calibration is documented with a 3 page Certificate containing
all necessary details.
The third page contains 1/3 octave tabulations for the microphones
frequency response: Actuator, Pressure (If applicable), 90 Degree
incidence, Free Field and Random.
Upon request the certificate can also be delivered on a Floppy Disc
where the Frequency Response tabulation in its EXCEL format can
be used to correct data as for instance data obtained using the
B&K PULSE System.
Click
here for a Sample of a Three-Page Microphone Calibration Report
Page: 1
| 2
| 3
Accelerometer Calibration is documented with a 2 or 3 page Certificate.
Page 1 and 2 contains the calibration information as obtained by
the Brüel & Kjær Transducer Calibration System 9610 and Technical
Data about 9610 . Page 3 shows an optional Mounted Resonance Plot.
Click
here for a Sample of a Three-Page Accelerometer Calibration Report.
Page: 1
| 2
| 3
|